国产成人一区二区三区,青青国产成人久久激情91麻豆,久久婷婷五夜综合色频,伊人狠狠丁香婷婷综合色,久久这里只有精品66re99,伊人情成综合网2019,久久996re热这里只有精品

Maintenance method of brake pads

Generally, if you have to exercise more than 80,000 km of the brake pads will need to be replaced. So often we should pay attention to the maintenance of brake pads, the method has six points:
  1. check the brake shoe every 5km under normal driving conditions, not only to check the remaining thickness, but also to check the state of shoe's wear, the degree of wear on each side, and whether the return is free and so on, and to find that abnormal conditions must be handled immediately.
  2. the brake shoe is generally composed of two parts of the iron lining board and the friction material, and must not wait for the friction material parts to wear and replace the shoe. Some vehicles with brake shoe alarm function, once reached the wear limit, the meter will alarm to change the shoe. The shoe that reaches use limit must be replaced, even if it can use for a period of time, it will reduce the effect of braking and affect the safety of driving.
  3. when replacing the brake pads provided by the original parts, only in this way can the braking effect between the brake pads and the brake discs is the best, and the wear is minimal.
  4. when replacing the shoe, the brake distributor shall be topped with special tools. Can not use other Crowbar hard back, this easily causes the brake caliper guide screw to bend, causes brake pads to die.
  5. after the replacement, be sure to step on the brake to eliminate the gap between the shoe and the brake disc, causing the first leg without brake and prone to accidents.
  6. after the brake shoe is replaced, 200 km must be worn in for the best braking effect, and the shoe newly changed shall be carefully driven.
  This article is arranged by Hengshui JiaLi brake material co., LTD

BACK NEWS

BACK PRODUCTS
COPYRIGHT ? 2016-2019 HENGSHUI JIALI BRAKE MATERIALS CO.,LTD ALL RIGHTS RESERVED.
SUPPORTS:Global auto parts procurement network
HOME TEL SMS MESSAGES